loading

7771 結果が見つかりました: 中古 Spare Parts

1 2 3 4 5 6
  • APPLIED MATERIALS: 0010-25415

    Ceramic Heater, 8" Certificate included.
  • APPLIED MATERIALS: 0100-09011

    AI Mux current sense.
  • APPLIED MATERIALS IAC2000-SI

    APPLIED MATERIALS: IAC2000-SI

    Anaorad Galaxy X-Y Axis Stage Controller Part No.: 70515800200W Two axes of servo control Version 4.40 Subassemblies: Anorad 810422-1 Chassis Anorad B800153 Encoder Multiplier Board (2) Anorad B800155 Low Voltage Servo Amplifiers Anorad B800157 IACDSP Encoder interface Comes in original packaging 2002 vintage.
  • VARIAN E11004390

    VARIAN: E11004390

    Standard type accel column (black) for E220/E500.
  • APPLIED MATERIALS: 0020-27666

    Shutter blades, 8", B101.
  • APPLIED MATERIALS 0150-21692

    APPLIED MATERIALS: 0150-21692

    RF Cable SQ with right angle.
  • OPAL: MEC

    Assy DR300, f/ Intel and R.O.W, P/N: 30612500000 for APPLIED MATERIALS systems.
  • APPLIED MATERIALS: 0190-17547

    Targets, W SIP 12", Tungsten, 4N 17" diameter x 0.25" TH.
  • TELEMARK CHEETAH

    TELEMARK: CHEETAH

    Digital programmable sweep controller.
  • YAMAHA: I-PULSE M2

    Lot of feeders: 70 F1-84 8MM TAPE FEEDER, 4MM INDEX 30 F1-82-1005 8MM TAPE FEEDER, 2MM INDEX, 1005 (0402 30 F1-82-0603 8MM TAPE FEEDER, 2MM INDEX, 0603 (0201 15 F1-12 12MM TAPE FEEDER 5 F1-16 16MM TAPE FEEDER 3 F1-24 24MM TAPE FEEDER 2 F1-32 32MM TAPE FEEDER 2 F1-44 44MM TAPE FEEDER 1 F1-56 56MM TAPE FEEDER 3 PS-MS3 MULTILANE STICK FEEDER.
  • VARIAN: V-4004

    Electromagnet.
  • BROOKS / PRI AUTOMATION SENTRY 1510

    BROOKS / PRI AUTOMATION: SENTRY 1510

    Manual Process Pressure Control System, Part Number: 11911G01 Rev. F Features: Sealed system Air-flow regulation with millisecond response time Automatic set point control Analog or digital host communication Production-proven Specifications: Type: Manual Style: Horizontal Mount. Negative Pressure Configuration: -0.12" to -1.85" of water column. (-3 mm to -47 mm to water column.) Positive Pressure Configuration: +0.12" to +1.85" of water column. (+3 mm to +47 mm of water column.) Flow Range: 0.01 to 1.05 SCFM (0.3 to 30 LPM) Accuracy to Set Point: ±0.04" of water column. (±1.0 mm of water column.) for dry process, ±0.08" of water column. (±2.0 mm of water column.) for pyrogenic processes Response Time: 50 milliseconds to exhaust fluctuations of 100%. Response to pyrogenic ignition or extinguish will vary by installation. Materials: Ryton and Teflon with Viton elastomers Set Point Control: 0-5 volt analog, RS422/RS485 at 9600 baud, Stand alone operator keypad (I do not believe it has this option) Power Requirements: TIM (Supervisor): +15 to +24 VDC, 650 mA and -15 to -24 VDC, 50 mA (I don't believe it has this option) Power Supply: 90 - 260 VAC, 47-63 Hz, 12 W nominal Facilities Requirements: Minimum House Exhaust: Negative pressure configuration 0.4" w.c. (10 mm w.c.) more negative than set point, Positive pressure configuration -0.5" w.c. (-13 mm w.c.) Maximum House Exhaust: 5.0" of water column (125 mm of water column.) Nitrogen: Input Tube OD: .25" Minimum Pressure: 40 psig (2.8 Kg/cm2) Maximum Pressure: 100 psig (7.0 Kg/cm2) Minimum Grade: House grade or better Input and Output Connections: 1" female NPT.
  • APPLIED MATERIALS 0040-85475

    APPLIED MATERIALS: 0040-85475

    AL cap for 12" Producer ceramic heater.
ショー 毎ページ
1 2 3 4 5 6