中古 MICROMANIPULATOR 6100 #114301 を販売中

Prober Platen: Accepts (10) or more magnetic or vacuum based manipulators 1" (25.4 mm) thick honeycomb construction Fine Lift Control True planar vertical motion, knob control Resolution: 0.3 micron per degree revolution Range: 0.5" (12.7 mm) Fast Lift Control Raises platen and microscope with adjustable microscope lift delay Range: 1.35" (34.3 mm) (3) Locking up positions Resolution: 18:1 reduction (handle:platen) X-Y Stage: Stage Movement Range of motion 6" x 6" (152 mm x 152 mm) Movement and vacuum stage planarity permanently set at factory Theta rotation control full 360° with locking knob Control knobs coaxial X-Y for single hand operation from either side, located center front Vacuum Stage Standard 5" (127 mm) diameter with dual tweezer slots Gold plated brass Flatness t.0005" (t 12 microns) Electrical isolation exceeds 5000 megohms at 500VDC Optional socket stage Conversion time vacuum to socket and back to vacuum stage less than 60 seconds Accepts P.C. cards with ZIF sockets for probing packaged devices while operating Locking handle for theta rotation control Microscope & Post: Vertical positioning +1.4" ( support) Vertical motion 0 -1.35" (34.3 mm) by platen fast lift handle or fine control knob with adjustable delay X-Y translation: 1" x 1" (25.4 mm x 25.4 mm) with knob control Factory planarized X-Y translation Coarse/fine focus control Microscope B&L MicroZoom with 2:1 zoom in body (3) Long working distance objectives (2.25X, 8X, 25X) Quadruple nosepiece accepts optional 50X objective Trinocular head with camera port, 10X eyepieces Coaxial illuminator with system mounted transformer and infinite rheostat control.