中古 NORDSON / ASYMTEK SL-940E #9240262 を販売中

Film coater (2) Valves Motion system: Type: Closed loop servo motors X-Y Velocity: 1000 mm / sec (39.4" / sec) Maximum X-Y Acceleration: 1g peak with s-curves Z-Axis velocity: 250 mm / sec (10" / sec) X-Y Repeatability: ±0.025 mm (0.001"), 3 sigma Z-Axis Repeatability: ±0.025 mm (0.001"), 3 sigma X-Y Resolution: 0.010 mm (0.0004'), 3 sigma Z-Axis Resolution: 0.025 mm (0.001"), 3 sigma Positional accuracy: ±0.075 mm (0.003"), 3 sigma Dispense area: In line: 500 x 440 mm With solvent purge station and / or LFWC: 500 x 440 mm With solvent purge station, LFWC and teach camera: 420 x 440 mm Conveyor: In line: Standard chain conveyor With queue stop and pinning set Motor driven with adjustment: 35 to 475 mm (1.4" to 18.7") Maximum clearance: 100 mm (4") above and below PCB Fluid delivery method: SC-280 Film coater SC-104 Viscosity control system (Non atomizing heated recirculating system) SC-204 Film coater (Non atomizing system) Swirl coat SC-300 film applicator (Three modes swirl system) Precise coat SC-400 jet applicator Facilities requirement: Air supply: 620 kPa (90 Psi, 6.2 Bar) Upto 0.34 m³/min Ventilation air: 340 m³/hr (200 SCFM) @ 25.4 mm (1.0") water column) Ventilation nitrogen source: 410 kPa (60 Psi, 4.1 Bar) @ 0.014 m³/min Power supply: 200/240 VAC, 10 Amps (max), 50/60 Hz Noise: ≤76.0 dBA (peak); ≤70.7 dBA (average) Options: Bar code recognition system 1D or 2D Black light Board presence sensor Flow meter Fiducial find camera Low fluid sensor Low fluid scale Programming camera Laser pointer programming tool Four position tilt Tilt and rotate Standard compliance: SMEMA, CE, NFPA and SEMI 2010 vintage.