中古 ERSA Eco Select 350 #293719092 を販売中

Selective soldering system Ambient temperature: 10 - 35 °C Relative humidity: 20 - 95% Permanent noise level: <60dB Paint finish: RAL 7035 / RAL 7016 Fuse: 3x63 A (2) Litres flux storage Spray nozzle: 130 µm Spray pressure: 0.5 to 1 Bar Spraying width: 3 to 6 mm Flux speed: 1 to 20 mm/sec Positioning speed: 1 to 260 mm/sec Accuracy of positioning: ±0.25 mm Portal handling system Short-wave emitter cassette (Dynamic preheating) Solder reel: Φ2 mm Maximum power: 10.2 kW, 16.8 kW 6 Emitters: Each 1.700 watt, 2800 watt Voltage: 3 x 230/400 V, N, PE 5 wire mains cable Voltage tolerance: ±10% Frequency: 50/60 Hz Nitrogen: Input pressure: 2 Bar Degree of purity: 5.0 Consumption: 5 m³/h 25 m³/h with multi-wave system Exhaust volume: Stack 150 m³/h per stack Exhaust volume: 150 m³/h Flux with the identification: RO, RE and OR with the effectiveness standards L0, L1, M0 According to IEC 6119011 Maximum current and power: Standard: 56 A, 35 kW DIP solder module: 56 A, 35 kW (2) Flexible solder modules: 62 A, 38 kW Solder module I / II: Point-Track solder module / Dipp solder pot Power: 3500 watt / 7200 watt Solder content: 130 kg / 350 kg Heating up time: 2 hours (250°c) / 2.5 hours (250°C) Maximum solder temperature: 330°C Smallest solder nozzle diameter: 4, 5 Maximum solder wave height: 5 mm Minimum clearance from PCB edge: 3 mm Solder speed: Z Aches 1 to 10 mm/sec Accuracy of positioning: ±0.25 mm Speed of positioning: 100 mm/sec Custom designed multi nozzle system PCB Device: Type: Universal / Custom designed / Point and track solder module Conveyor width: 300 mm PCB Length: 350 mm / 350 mm / 450 mm 2004 vintage.