中古 ATI 204CM #167483 を販売中

Depaneling routing system SPECIFICATION Machine Base Fine grain black granite Power Input 208-480 VAC, 3 phase 30A-15A, 50-60 Hz plus ground Other power inputs available Axis Positioning Compound X-Y table Table/Carriage Guide And Support Precision steel linear guides Leadscrews Precision ground X, Y and Z recirculating pre-loaded ball screws Position Accuracy +/ 0.0005’’(+/ 0.0127mm) Position Repeatability +/ 0.0002’’ (+/0.0051mm) Tooling Plates Phenolic with conductive foam and copper Ground strip Maximum Panel Size 20’’X 24’’ (508 X 610mm) 24’’ X 24’’ under one spindle (610 X 610mm) SPINDLE SPECIFICATION Number of Spindles 2 Spindle Drive Belt driven, 2 hp variable from 3,000 to 24,000 RPM Collets Pneumatically operated Router Bit Sizes 0.031’’-0.250’’ (0.79-6.35mm) CONTROL SYSTEM SPECIFICATION Controller PMC-450, 32 bit Motorola 68040 processor Data Input/Output 3-1/2’’ Dos compatible floppy Software PSOS Control Tower OPERATING REQUIREMENTS Ambient Temperature 72 degrees +/ 2 degrees F (22 degrees +/ 1 degree C) Ambient Humidity 45-60% RH Air Input 105-150 psig at 23 scfm flow 7.4-10.5 kg/cm2 at 651 l/min Filtered to better than 0.01 microns 99.99% free from oil and water Debris Vacuum Requirement 240 scfm at 41 inches of water (6796 l/min at 1041mm of water) OPTIONS 9 Position automatic tool changer Status Light Stripper Plate.