中古 MANNCORP C350 #9169181 を販売中

Wave solder machine PCB Dimension: Width: 50-350 mm Length: 75 mm Thickness: 1.0-2.0 mm Edge of carried: 3.0 mm Parts height: 60 mm Height of parts lead: 6 mm Conveyor: Max. 2.0 M / min.(60 Hz) Conveyor speed: Max. 1.6 M / min.(50 Hz) Fixed of rail: Inlet: 780 mm Outlet: 1,020 mm (at 6°) Conveyor height: Inlet: 855 mm Outlet: 975 mm (at 3°) Direction: Standard: Left in right out Option: Right in left out Conveyor angle: Set up 4.5° (3-6°adjustable) Angle adjustment: By hand wheel located inlet and outlet Vents (Exclude motor): Dimensions: Φ150 mm x H 60 mm Flow rate: Min.12 m³ / min Inlet rail: Method: Rail Length: 350 mm Edge of carry: 3.0 mm Power: Manual Foaming fluxer: Air pressure: 0.5-1.0 kg / cm² Foaming control: By regulator and speed controller Foam height: Max.10 mm Nozzle width: 25 mm Pre-heater: Consumption: 1.7 kW x 3-5.1 kW Heater: Stainless sheathe heater with fin Sensor: Pt100, 3 Wires Zone (L: 600 mm) Method of temp.control: PID + SSR Hood: Stainless steel Solder pot: Material of bath: Cast iron Wave: Single wave Consumption: 7.8 kW I.3 kW x 6 Wave motor: 90 W Capacity: ~165 kg (Lead free) Method of temp. control: PID + SSR Sensor: Pt100, 3 Wires Heating: Indirect Working temperature: 300°C (Max.) Conveyor: Finger: Engineering plastic L type (Std) Rail: A1 Alloy, surface hardening Width adjust: Ball screw Motor: 60 W Power: No fuse breaker (3 Phase, 50 A) Main power switch: 3Φ, AC220 V ± 10%, 50/60 Hz 2012 vintage.