中古 AIST-NT CombiScope 1000 #9208611 を販売中
URL がコピーされました!
タップしてズーム
ID: 9208611
Scanning probe microscope
AFM Laser: 1300 nm
TOKYO INSTRUMENTS Nanofinder 30
Raman optical system: Light for TERS
Digital controller
Measuring modes:
Contact AFM in air
Semicontact AFM in air
Non-contact AFM
Phase imaging
Lateral force microscopy (LFM)
Force modulation
Magnetic force microscopy (MFM)
Kelvin Probe (Surface potential microscopy)
Capacitance and electric force microscopy (EFM)
Force curve measurements
Piezo response force microscopy
Nanolithography
Nanomanipulation
Scanner:
Scanning range: 100um x 100um x 20um (+/-10%)
Scanning range: 200um x 200um x 20um (+/-10%)
Scanning type: Sample
XY Non-linearity: 0.05%
Z Non-linearity: 0.05%
Noise level:
0.1nm RMS in XY dimension in 100Hz bandwidth
With capacitance sensors on
0.02nm RMS in XY dimension in 100Hz bandwidth
With capacitance sensors off
<0.1nm RMS Z capacitance sensor in 1000Hz bandwidth
Digital closed loop control: X, Y, Z Axes
Active elimination of XY phase lag
Overshooting and ringing results in fast scanning
Without any dynamic image distortion
Base:
Manual sample positioning:
Range: 25 x 25 mm
Positioning resolution: 1um
Motorized SPM measuring head positioning: 1.6 x 1.6mm
Positioning resolution: 1um
Motorized approach: 1.3 mm
Sample holder for standard slides and cover glasses
Sample holders:
Maximum sample size: 50.8 x 50.8 mm
Height: 5 mm
With capability measuring area: 25 x 25 mm in any quadrant of 50.8 x 50.8 mm area / In center of sample
Maximum sample size: Upto 100 mm width
Length: More than 100 mm
Height: Up to 15 mm
With capability to measuring area: 25 x 25 mm in any part of center cross
With width: 25 mm
AFM Head HE001:
Laser wavelength: 1300nm
No registration laser influence on biological sample
No registration laser influence on photovoltaic measurements
Registration system noise: <0.03nm
Fully motorized:
(4) Stepper motors for cantilever and photodiode automated alignment
Free access to the probe for additional external manipulators and probes
Top and side simultaneous optical access
With planapochromat objectives: (10x, NA=0.28 and 20x, NA=0.42)
AFM Head HE002:
Laser wavelength: 1300nm
No registration laser influence on biological sample
No registration laser influence on photovoltaic measurements
Registration system noise: <0.1nm
Fully motorized:
(4) Stepper motors for cantilever and photodiode automated alignment
Free access to the probe for additional external manipulators and probes
Top and side simultaneous optical access
With planapochromat objectives (100x, NA=0.7 and 10x, NA=0.28)
Optical access:
With AFM head HE001:
Capability to use simultaneously top and side planapochromat objectives (10x, NA=0.28 and 20x, NA=0.42)
Field of view: From 900m - 140m
Optical resolution: 1m
Bottom optical access with dry and immersion objective
With AFM head HE002:
Capability to use simultaneously top and side planapochromat objectives (100x, NA=0.7 and 10x, NA=0.28)
Field of view: From 100m - 50m
Optical resolution: 0.4m
Maximum side planapochromat objectives: 20x, NA=0.42
Bottom optical access
With dry and immersion objective
Compatibility with inverted optical microscopes
No interference
With optical imaging due to infrared laser
Capability to install on:
NIKON: Ti-E, Ti-U, Ti-S, TE2000;
OLYMPUS: IX-71, IX-81
Phase contrast, DIC and fluorescent techniques
With native optical condenser
Upgradeability to OmegaScope for spectroscopic and TERS operation
Numerical aperture: Up to 0.1
Magnification: 19" Monitor
With 1/3" CCD: From 85x - 1050x
Horizontal field of view: From 4.5 - 0.37 mm
Stand and coarse / Fine focusing unit
Capability to use planapochromat objectives:
10x, NA=0.28
20x, NA=0.42
100x, NA=0.7 (Depends on AFM head)
Capability to use M plan Apo objective: 10x, NA = 0.28
Magnification: 19" Monitor
With 1/3" CCD: 400x - 5300x
Horizontal field of view: From 0.96 - 0.07 mm
Resolution: Up to 1 um
Vibration isolation:
Isolation: Dynamic 0.7Hz - 1kHz, beyond 1kHz
Size: 400 x 450 x 75mm
Controller electronics:
Modular fully digital expandable controller
DSP 190 MHz
USB 2.0 Interface
High speed 500 kHz 18-bit ADC
20 Channels
5 MHz frequency range registration system
(2) Lock-in amplifiers
Frequency range: 5 MHz
(6) Digital
Generators: 32–bit
Frequency range: 5 MHz
Resolution: 0.01 Hz
HV Amplifiers: -5 +120V, 0.4 ppm HV noise
AC, DC Bias voltage: -10, +10V
Frequency range: 2 MHz
(7) Stepper motors control
Digital inputs / Outputs for integration
With external equipment
Analog input / Outputs for integration
With external equipment
Computer:
High performance computer
Intel Core 2 Duo
RAM: 1GB
500GB HDD
DVD R/W
(2) 19" LCD monitors
S-video capture card
Operation system: Windows XP.
AIST-NT CombiScope 1000は、バイオテクノロジーおよび材料科学用途向けに設計された先進的な研究顕微鏡です。高度な光学技術と統合イメージング技術を利用して、ユーザーに高解像度のイメージング機能を提供します。CombiScope 1000には、視野全体で最大解像度の0.7µmを可能にする高解像度の目的を含む、さまざまな機能があります。また、反射光顕微鏡と蛍光光学顕微鏡の両方をサポートする補正光学設計を備えています。さらに、顕微鏡の高度な機械設計により、研究者は高速イメージングを実行するだけでなく、正確なサンプルの正確な位置決めを行うことができます。この顕微鏡は、可視光、紫外線、近赤外線スペクトルでのイメージングが可能であり、カメラ、光源、目的などの新しい機能で簡単にアップグレードできます。また、画像解析を容易にするさまざまなソフトウェアアプリケーションとも互換性があります。AIST-NT CombiScope 1000には高度なイメージング技術が搭載されており、自動化された機能により簡単な操作が可能です。また、精密なディテールと色精度で高精度な画像を生成することができます。デジタル信号プロセッサを使用して、画像を最適化するために要素を自動的に調整します。高度なイメージング機能に加えて、CombiScope 1000はさまざまなタスクのサンプルホルダーやアクセサリと互換性があります。これにはVacum-Illustrated Sample Holding System （Vacum-Illustrated Sample Holding System： Vacum-Illustrated Sample Holding System： VIHSS）が含まれます。また、顕微鏡を制御するために使用される内蔵のPCが付属しているだけでなく、画像やデータを分析し、保存します。全体として、AIST-NT CombiScope 1000は、高解像度イメージングのための広範な機能と機能を研究者に提供する高度な研究顕微鏡です。自動化された機能、高度な光学、さまざまなソフトウェアおよびアクセサリとの互換性により、さまざまなバイオテクノロジーおよび材料科学アプリケーションに最適です。
まだレビューはありません