中古 JOHNFORD DMC 1500H #9244548 を販売中

CNC Machining center Gantry type Equipped with: (2) Speed geared heads High pressure thru spindle coolant (1,000 PSI) High pressure coolant pump High speed machining Rigid tapping AI Nano high precision machining functions Ethernet Chip conveyors Remote handwheel Control: FANUC 0iMD Travels: X-Axis (Longitudinal): 59.1" Y-Axis (Cross): 35.4" Z-Axis (Vertical): 30" Table to spindle distance: 5.9"-35.9" Distance between columns: 43.3" Table: Table working surface: 63" x 33.5" Maximum workload on table: 10,120 Lbs Table surface: Ground / T-Slotted (7) T-slots width: 22 mm Spindle: Speed: 0-8,000 RPM Spindle motor: 25 HP Spindle taper: CT 50 Spindle drive system: (2) Speed gear boxes ATC: (40) Tools Tool selection: Bi-Directional-random Tool change time: 3.5 sec tool-tool Maximum tool diameter: 5.3" With adjacent tools Maximum tool diameter: 7.8" Without adjacent Tool type: CAT 50 Maximum tool length: 15.7" Ball screws: X-Y-Z Ball screw diameter: 2.0" X, Y, Z x 10 pitch Ball screw type (Pre-loaded): Class 3 double nuts Ball screw mounting type: Pre-tensioned Servo motors: X-Y-Z Servo HP: 5.2 HP Servo motor mounting (X/Y): Direct coupled Servo motor mounting (Z): 3.5 Feeds: Rapid traverse rate: X: 944 IPM Y: 944 IPM Z: 590 IPM Cutting feed rate: 0.01 - 394 IPM Positioning accuracy: +/- .0003" Full stroke Repeatability: +/- .0002" General: Coolant tank capacity: 120 Gallons Floor space: 186" x 118" x 148" Air source: 90 PSI Power source: 208/220, 3 Phase, 125 A 2006 vintage.