中古 HARDINGE VMC 700 #9172550 を販売中

Vertical machining center With GE FANUC 18m control, 28" X 18" X 22" Travel: X-Axis: 28" Y-Axis: 18" Z-Axis: 22" Spindle nose to table surface: 3.35 to 25.39" Spindle center to column: 19.5" Table Length: 4 0" Width: 19" T-Slot size (width x no. X pitch): .688" X 4 X 3.937" Fixture location key ways (width x no.): .688" X 3 Floor to table surface distance: 33.74" Spindle: Taper size : No.40 Standard shank type (cat-v-40): ANSI B5.50-1985 AC Digital motors: Standard spindle: 20 HP Torque rating @ base speed: 112 FT-LB Base speed: 938 RPM Speed range (1-rpm steps): 0 to 10,000 rpm X & Y-Axis motor: 1.2 HP Z-Axis motor: 5.0 HP Slides: Way construction: Heavy duty linear guides X & Y-Axis rapid traverse rates: 984 IPM Z-axis rapid traverse rate: 787 IPM Cutting feedrate: 591 IPM X & Y-Axis thrust (continuous): 750 LBF Z-Axis thrust (continuous): 1,500 LBF Z-Axis thrust (on work piece): 2,500 LBF Preloaded ball screw diameter (All axes): 1.575 Tool changer: Type: Swing arm magazine Selection method: Random bi-directional (20) Tools Shank type: ANSI B5.50-1985 / Size 40 Retention knob: ANSI B5.50-1985 / Size 40 Tool diameter with adjacent tools: 4.33" Tool length: 11.82" General: Power consumption: 50 kvA Coolant system tank capacity: (80) Gallons Electrics: 230 Volts, 3 PH, 60 CYC Equipped with: GE Fanuc 18m control Manual pulse generator Chip conveyor Hour reading: 71411 hrs Includes: Manuals 1996 vintage.