中古 THERMOCUBE 600L #9232457 を販売中

Solid state cooling systems, many available Part number: 10-600L-1G-1-R2-EF-VD-AR-307A Options selected: 1G: 1 lpm Magnetic drive gear pump: 35 psig US Power cord Communications RS232 (R2) (5) Micron external filters (EF) for process fluid path Vibration dampening material (VD) Auto restart (AR) CES-307A Customized features: Special liquid-to-liquid heat exchanger with (2) stainless steel facility water (House) cold plates One copper process plate & sealed thermoelectric (TE) modules Facility water & process plumbing (fittings and tubing) 10kΩ Thermistor on copper cold plate for 4°C pump fail 3/8" Female SS NPT process inlet fitting 3/8" John guest process outlet 3/8" OD Tubing to filter 3/8" John guest to 3/8" NPT on filter inlet No fitting on filter outlet (Filter outlet is 3/8" female NPT) Facility inlet / Outlet fittings are 3/8" female SS NPT Operating range (Set point): 5°C to 50°C Ambient temperature range: 10°C to 40°C Non-condensing Stability / Repeatability: ± 0.05°C With constant load (Even near ambient) Cooling capacity (Typical): ~500 Watts at 20°C in 20°C ambient air Noise level (At 1 meter): < 48 dBA (Pump dependent) Recommended coolant / Process fluid: Koolance (27% Propylene glycol / Water mix) Process fluid fittings: 3/8" Female NPT inlet / Outlet fittings Pump: 1 LPM at 35 psig magnetic drive gear pump Tank volume: 300 ml With level sensor Process fluid filter: 5 μm External filter with 3/8' hose from chiller Required facility water: 1 GPM Recirculated Filtered Treated industrial water Temperature: 10°C to 25°C, pH 6.5 to 8.2 Facility water fittings: 3/8" Female NPT inlet / Outlet fittings Controls: Digital PID controller for heating and cooling Communications: Keypad / RS232 Interface Universal power input: 115-230 VAC, 50/60 Hz, 7-5 Amps maximum Alarms: Temperature Fluid level System or component failure (Display and RS232 option).