中古 HUGHES / PALOMAR 2460-III #4970 を販売中

Wire bonder Components: Bond type: Thermosonic ball bonding Cycle time: 0.25 sec/wire (25-mil Long wire, 20-ms bond time) Alignment: With CCTV / Electronic cross hair / Automatic with pattern recognition Bond depth range: Approximately 0.250 in. (6.5 mm) Bond force range: 20-255 grams Gold bonding wire: 0.0007 in. - 0.0020 in. (18 µm - 50 µm) Wire spool type: Diameter: 2-in. (50-mm) Single / Double flange spool Wire tensioning: Air-regulated flow in wire feeder tube Flame-off: Negative electronic arc with adjustable miss detection Ultrasonic generator: 1-W or 5-W (Selectable) 60 kHz Programmable control for output mode: Constant voltage or constant current Power level: 255 Discrete levels Z Stroke: 0.4 in. (13 mm) Capillary: 0.0625-in. (1,6-mm) Outside diameter by 0.437-in. (11-mm) long X/Y Positioner: 4 in. x 4 in. (100 mm x 100 mm) Stop-to-stop each direction standard Option: 5 in. x 12 in. (127 mm x 305 mm) X-Y-Z Resolution: 0.0001 in. (2.5 µm) Repeatable to ±0.00005 in. Communications interface: RS-232 and IEEE-488 Viewing system: Charge-coupled device (CCD): Camera resolution: 565 by 350 Lines Diagonal monochrome display, 9" BAUSCH & LOMB Stereozoom 4 Microscope (7x to 30x) With tilt and focus adjustments Working distance: 100 mm 10x Eyepieces standard Lighting: Variable intensity fiber optic lighting Zoom optics with through-the-lens Lighting option available Floppy disk drive system: Dual 80-track double-sided disk drives (160 tracks/drive) Uses: 5-1/4" Double-sided Double-density Diskettes: 96 TPI Motors and drives (X, Y, and Z Axes): 5 VDC Servo motor Digital encoder assembly (2000 PRP) Heated work stages: Heated stage assemblies: 2.6-in. x 2.6-in. or 4.0-in. x 4.0-in. With removable vacuum tooling blocks Blank tooling blocks for work stages Z-head: A 1" Stroke option available System power supply outputs: +5 VDC, 60 amp +10 VDC ±2 VDC, 1 amp -5 VDC, 5.5 amp +12 VDC, 4 amp -12 VDC, 3.5 amp +15 VDC, 1 amp -15 VDC, 1 amp +24 VDC, 5 amp External requirements: Vacuum: 20-in. Hg Nitrogen: Dry N2 for wire feed, approximately 15 SCFH Power: 115 Vac, 50/60 Hz, 20 amp, 8 amp (Typical).