中古 DAGE 2400 PC #58694 を販売中

Shear / Pull Tester Power Requirements: 110-120 VAC @ 5 A, 220-240 VAC @ 3.15 A Dage BT2400PC Application 1997 Windows 98 Fully configured tower style machine control computer Supplied with a manually adjustable X-axis table. This unit is a multi-function, semi-automatic test facility, offering extremely versatile destructive and non-destructive testing (NDT) or ball-bonds, and wire pull Features: Pentium motherboard installed versus standard EPROM board configuration Windows 95 software interfaced to system hardware by motion control card PC Monitor used versus typical LED-type display Automatic Calibration and Linearity Checks Advanced Load Cartridge Design Mouse-driven operation for machine set-up, control and analysis operations Floppy and hard drives include for introduction and storage of test configurations and results Comprehensive range of analysis screens and test result files allow data analysis directly on the PC2400T. Information can be printed using standard Windows print options. Results are automatically stored on the hard disk in CSV text file format and can be exported to floppy disk, RS232 port or directly to a factory mainframe via a network. Quick release design ensures that change-over time between test functions is minimized Applications include: Ball shear Aluminum wedge shear Low force die shear The system caters for these types of bond test using up to 5 kg force Die shear using up to 100 kg force Wire-pull testing using up to 10 kg force Software/Configuration Versions: Main Control: 2.39d Motion Config: 2.3612 Motion Program: 2.381 Motion Board: D841 Issue 4 Cartridge included (Choice of one): Model Number: 2400PC-BS5KG Ball Shear Cartridge for 5k grams Model Number: 2400PC-WP100 Wire-Pull Cartridge for 100 grams Specifications: Z Axis Travel: 2.87" Work Holder: X Axis Travel: 1.0" manual adjustment, 0.9" motorized adjustment Y Axis Travel: 0.9" Maximum Test Force: Z Axis: 10 kg Y Axis: 100 kg Minimum Detectable Load (From Software Version 2.20): 5% of currently selected test load range (For destructive testing - 5% of the threshold parameter slider setting) Work Area (Swing Round Tool): 8.5" minimum Keypad: 4 x 4 matrix Joystick: Self centering Illumination: 20W Halogen lamp Vacuum Base: 20" Hg minimum (supply to machine) Sound Level: Continuous A-weighted sound pressure at the workstation < 70 dB(A) Die Shear Testing Specifications: Measurement Accuracy: +/-0.5% of load cell rating Test Mode: Destructive or Non-Destructive Shear Mode: Automatic Shear Direction: Y axis, front to back Shear Tool (Standard): Tungsten carbide Landing Speed (Programmable): 0 to 0.039" / s Landing Force: 3g to 10g (depending on landing speed) Shear Height: Range: 0 to 0.019" Resolution: 0.00025 mm Accuracy (At Start of Test): +/-0.00025 mm Accuracy (Though Test): +/-0.0005 mm Shear Speed (Programmable Range): Cartridge dependent Y Axis Travel During Shear Test: Cartridge dependent Ball Shear Testing Specifications: Measurement Accuracy: ±0.5% of load cell rating Test Mode: Destructive or Non-Destructive Shear Mode: Automatic Shear Direction: Y axis, front to back Shear Tool (Standard): Tungsten carbide Landing Speed (Programmable): 0 to 0.039" / s Landing Force: 3g to 10g (depending on landing speed) Shear Height: Range: 0 to 0.5 mm (0.019") Resolution: 0.001 mm Accuracy (At Start of Test): ±0.00025 mm Accuracy (Through Test): ±0.0005 mm Shear Speed (Programmable Range): Cartridge dependent Y Axis Travel During Shear Test: Cartridge dependent Pull Testing Specifications: Measurement Accuracy: ±0.5% of load cell rating Test Mode: Destructive or Non-Destructive Pull Mode: Manual, Step back, or Autohook Pull Direction: Z axis, vertical Z Axis Stroke: 73 mm Pull Tool (Standard): Hook or tweezer Pull Speed (Programmable): Range (up to 1kg rating): up to 5.0 mm/s NDT Overshoot: 0.5% FSD.