loading

2070 results for found: 中古 Solar Production Equipment

1 2 3 4 5 6
  • -: -

    - - Manufactured New: Solar Module Laminator (Oil heating) Outline Size: 2470mm x 1870mm x 1200mm Equipment Weight: 3T Power supply: 380 V, 3 phase Power Max.: 40 kW, Working: 15 kW Vacuum Pump Speed: 30L/S Maximum vacuum: 10Pa Laminated Size: 1400mm x 2200mm Control mode: Touch-screen Control Highest working temperature: 180°C Temperature uniformity: ±1.5°C Compressed air pressure: 0.5-0.8 MPa Compressed air flux: 2000L/min Better temperature uniformity: ±1.5°C, it fulfills a solidification craft demand absolutely Adjustable laminated pressure: 0.02 MPa - 0.1 MPa Heating mode: Adopt heat conduction oil. Temperature is adjusted automatically by PID intelligence system that controls accurate Performance: It can operate 24 hours continuously in high temperature, which is applicable in industry and laboratory Proof-drape design of: Rubber, the design can lengthen available service life of rubber, improve laminating smoothness Flexible control: Including automated mode and manual mode, flexible control mode integrates with the techniques of vacuum, atmospheric pressure, PID temperature control, programmable control and relay output, which realizes various complicated control technology Structure characteristic: It pulls towards the back, which is convenient to module up and down. The plat of laminator is higher than the frame. Silica gel seal places on, which is lengthened the service life. It adopts patent techniques of laminated platform and integration of under-vacuum chamber, which contribute to smoothness and non-deformation Emergency openings system: It continues to laminate modules as emergency occurs (eg. power cut). Operator opens the upper cover and takes out modules by manual mode Alarm system: When oil temperature of laminator exceeds the alarm limit, the system shut off the power supply of heating automatically Ensure security-lock of upper cover: The upper cover can lock arbitrarily position and doesn’t fall down when it works in usual. The upper cover locks any position automated when power cut urgently, so it can ensure operators safe Emergency pushbutton: Operator may deal quickly and shut off total power supply as emergency Operation monitoring: It monitor the running parameters anytime by the operate interface (include degree of vacuum, temperature, pressure of air supply, running state and so on). Applying Range: The laminator is applied to laminate and solidify. It is applied to laminating solar module of single-crystal silicon and multi-crystal silicon.
  • -: -

    - - Manufactured New: Semiautomatic Solar Module Laminator Features: PLC and touch-screen control system All parameters are setup on the touch-screen Conductive oil heating station is separated with the machine Overheating sensor is attached for the heating plate Disconnection detector is mounted to the heater for the heating plate Special connecting system: silicon membrane can be changed within 20 min Specifications: Laminating area size: 2100 × 1100mm Maximum thickness of laminate: 35mm Vacuum degree: 200 to 20pa Working temperature range: 130 180℃ Temperature uniformity: ± 1.5℃ Heating process: oil heating system Power supply: 380VAC, 50 Hz, 3 phases 5 wires Peak power: 36kW.
  • -: -

    - - Manufactured New: Solar Module Laminators Platen Size 50" x 75" for panel 4'x6' Clamshell Features: Screen touch and emergency stop Easily adjusted for a wide variety of PV technologies including Crystalline and Thin-Film solar modules Voltage: 240 VAC, L1 / L2 / PE Frequency: 50 / 60 Hz Current: 50 Amps Wire Size: 6 AWG Main AC Terminals Connector Type; Direct Facility Wiring Pressure: 60-120 psi Volume: 1 SCFM Connector: One-Touch fitting for 1/4 in Tubing.
  • 2BG: CORE 6

    2BG CORE 6 Automatic photovoltaic laminators Capacity: 3 panels/cycle Area: 3420 x 2000 mm Automatic loading / unloading system 2011 - 2013 vintages.
  • 2BG: CORE 6

    2BG CORE 6 Automatic photovoltaic laminators Capacity: 3 panels/cycle Area: 3420 x 2000 mm Automatic loading / unloading system 2011 - 2013 vintages.
  • 2BG: PV L600A

    2BG PV L600A Laminator Specifications: Useable heating surface: 3000 x 2000 mm Aluminum Max. thickness of the laminate: 30 mm Max. temperature: 180°C Temperature distribution on heating plate: ± 2°K PID controls: 18 Ultimate valve of vacuum: <0/5 bar Water consumption: 600 L/hr Power: 65 kW 2007 vintage.
  • 2BG: CORE 6

    2BG CORE 6 Automatic photovoltaic laminators Capacity: 3 panels/cycle Area: 3420 x 2000 mm Automatic loading / unloading system 2011 - 2013 vintages.
  • 2BG: CORE 6

    2BG CORE 6 Automatic photovoltaic laminators Capacity: 3 panels/cycle Area: 3420 x 2000 mm Automatic loading / unloading system 2011 - 2013 vintages.
  • 2BG PV: TS600IRA

    2BG PV TS600IRA Stringer Specifications: Soldering process: Infrared lamps Throughput: 600 cells / hour Power: 13 kW Air consumption: 300 L/min (6-7 bar) Cell handling: Vacuum system 2007 vintage.
  • 2BG PV: TS600IRA

    2BG PV TS600IRA Stringer Specifications: Soldering process: Infrared lamps Throughput: 600 cells / hour Power: 13 kW Air consumption: 300 L/min (6-7 bar) Cell handling: Vacuum system 2007 vintage.
  • ABB: IRB6600/M2004

    ABB IRB6600/M2004 Back-end solar panel robot.
  • AIRCO / BOC: G-45

    AIRCO / BOC G-45 Inline glass / solar coating system Capacity: 1 million square feet of coated glass per year Panel Size: up to 25" x 75" x .75" PLC System Control: three minute load to load time System includes all cables, water and vacuum manifolds Entry & Exit Load Tables Entry & Exit Load Lock Chambers Nine (9) cathode positions with three (3) cathodes installed Chrome Targets Airco 30 KW & 60 KW DC Power Supplies Gas Mass Flow Controllers (MFC's) LEYBOLD Residual Gas Analizer (RGA) Installed Includes: Manifolds Pumps Cable trays Wiring De-installed and currently in storage 1990 vintage.
  • AIRCO / BOC: G-45

    AIRCO / BOC G-45 Inline glass / solar coating system Capacity: 1 million square feet of coated glass per year Panel Size: up to 25" x 75" x .75" PLC System Control: three minute load to load time System includes all cables, water and vacuum manifolds Entry & Exit Load Tables Entry & Exit Load Lock Chambers Nine (9) cathode positions with three (3) cathodes installed Chrome Targets Airco 30 KW & 60 KW DC Power Supplies Gas Mass Flow Controllers (MFC's) LEYBOLD Residual Gas Analizer (RGA) Installed Includes: Manifolds Pumps Cable trays Wiring De-installed and currently in storage 1990 vintage.
  • ALPHA OMEGA POWER TECH: GEN 2

    ALPHA OMEGA POWER TECH Gen 2 ALPHA OMEGA POWER TECH Gen 2 Pulsed solar simulator.
  • ALPHA OMEGA POWER TECH: GEN 2

    ALPHA OMEGA POWER TECH Gen 2 Pulsed solar simulator.
  • APPLIED: ATON 1600

    APPLIED ATON 1600 Sputter systems, 2007 vintage.
  • APPLIED: ATON 1600

    APPLIED ATON 1600 SiN PVD Sputter system (10) chambers 2007 vintage.
  • APPLIED: ATON 1600

    APPLIED: ATON 1600 Sputter system (10) chambers 2007 vintage.
  • APPLIED: ATON 1600

    APPLIED: ATON 1600 SiN PVD Sputter system, 2008 vintage.
ショー 毎ページ
1 2 3 4 5 6