loading

4919 results for found: 中古 Probers

1 2 3 4 5 6
  • ACCRETECH / TSK: UF 3000

    ACCRETECH / TSK UF 3000 Probers Specifications: Chuck: 305mm hot chuck Loader: open cassette special FOUP loader Joy stick direction: opposite direction of the stage Tester connection: Tester interface: GP-IB (TEL special compatible) Cable length: 4m Optional hardware: Chuck surface treatment: Kanizen plating, chuck size: 305mm Needle cleaning: cleaning unit (280 x 160mm) 150 x 150mm Probe card auto changer: no Automatic needle alignment: E1-550-2 Internal printer: 40 figures Wafer ID reader: rear surface (Type6) OCR RF-ID: no Optional software: Automatic needle alignment: yes Automatic needle height setting: yes Needle inspection: no, can manually inspect Multiprobing: 3 to 64 die: yes Re-probing: yes Vega: yes GEM (Ethernet) / GEM (CMS) / GEM (PJ/CP) : yes Card barcode reader: ACCRETECH, standard goods/holder: necessity, yes Soak time option: yes Vertical option: yes Wafer shape measurement function with the alignment camera: yes Residual wafer storing option: yes Remote monitor tool: no Probe mark inspection: yes Automatic probe to bad alignment: yes Bump alignment (including post card alignment) : yes Multifunction cleaning pad: yes Ethernet interface: yes GB-IB (with cable) : yes RS-232: yes Extension to 512 DUT: no Motorized tilt correction: no Power cable: standard WZ6811 Air source connection: standard, joint for 1/4“ tube Vacuum source connection: standard, joint for 1/4“ tube Power requirements: 200VAC Currently installed 2005 vintage.
  • ACCRETECH / TSK: UF 200

    ACCRETECH / TSK UF 200 Probers, 5", 6", 8" Overall accuracry: within 4 X/Y axes: Probing area ± 120mm Maximum speed 200 mm/s Z axis Full stroke 69mm Maximum speed 35 ms/0.5mm Stroke Q axis rotation range ±5 dec Fine alignment: CCD ITV Image processing Loader Cassette mounts: 1 (2nd cassette with option) Wafer handling: Robot arm / Backside holding Hard Disk 3.5" 540MB (1 unit standard) Floppy disk: 3.5" 2HD/2DD (1 unit standard) Display 10.4" TFT Color LCD Power consumption ~1.5kVA Air supply Source pressure: 0.4 MPa or more Consumption: Approximately 0.1 liters/wafer Vacuum supply: less tahn 50kPa, 30 liters/minute 2005 vintage.
  • ACCRETECH / TSK: UF 200

    ACCRETECH / TSK UF 200 Probers, 6" & 8" Left side loader GPIB / TTL Network Card Automatic Probecard Changer Needle Cleaning with a cleaning wafer Gold Plated Hot Chuck Connector List : TTL, GPIB, Printer Software version 03.04.49 1999 & 2000 vintage.
  • ACCRETECH / TSK: APM-90A

    ACCRETECH / TSK APM-90A Prober OCR hot chuck GPIB board optional.
  • ACCRETECH / TSK: UF 3000

    ACCRETECH / TSK UF 3000 Probers with OCR, 8", 12" Temperature: -55 ~ 30 Clean pad: 150 X 150 mm Hinge: VHF 9000 (Rear- Front) Loader: Main-body's Left site OCR: Cognex 1700 FTP/Remote Power 208V.
  • ACCRETECH / TSK: UF 200

    ACCRETECH / TSK UF 200 Probers, currently warehoused, 1997~2000 vintage.
  • ACCRETECH / TSK: UF 3000

    ACCRETECH / TSK UF 3000 Automatic wafer probers Specifications: ALP II 1 cassette, 25 pvs, 20GB HD, 12" color LCD display support standard function for yield check, continuous fail check, real time wafer map display and print, TTL I/F standard, etc. Heat u chuck (Kanizen type) ~ 150°C Auto pad alignment unit (Auto set-up) 40 digits printer FP-IB I/F Coordinate, Category, Mapping I/F RFID Reader Type 6 OCR Needle mark inspection Multi-site probing function 3~128 die HF MT6000 APC for ZIF probe card holder Probe card changer SECS/GEM Ethernet card function Supervisor charge 2005~2006 vintage.
  • ACCRETECH / TSK: APM-90A

    ACCRETECH / TSK APM-90A Probers Chuck size: 6" 8" Nickel hot 30°-150°C, Kanizen type Fine Alignment CCD Image Processing Casset loader 1 Cassette Hard Disk 3.5" 100MB (TSK Standard) Floppy Disk 3.5" 2HD (TSK Standard) Display TFT Color LCD Chuck Type Hot Chuck,with hot chuck controller Mark Machine: Marking module (Marker and Cable) 4GT ZANDEX Marker Clean Unit With "Clean Pad" Ø 50mm Pad Printer TSK standard GPIB TSK standard (With GPIB Cable) Auto Profile Alignment E1 Camera Auto Needle Alignment E2 Camera Boot ROM Version 07.01.S4 or 06.03.S4 Board # 1,2,3,4,5,7,8,9,10,11,12,14,16,17,18 Voltage AC220V Slot No. VME Box Configuration Yes/No 1 Master CPU Yes 2 FDD/HDD TVME-322 Yes 3 Ethernet CN1 Yes 4 VME-128M Yes 5 Communication interface CN2 Yes 6 BLANK No 7 ITV(COGNEX) Yes 8 PIO Yes 9 X/Y Coordinate option 10 TTL/GPIB Yes 11 PGEN Yes 12 GCRTC Yes 13 BLANK No 14 CAP Sensor Yes 15 BLANK No 16 SLAVE CPU Yes 17 LOADER IO Yes 18 LOADER PGEN Yes 19 BLANK No 20 HD/FD Yes Options: OCR E3 Camera "Wafer ID Reader Camera" Ethernet Group Management OS Version 06.09.X7 or 06.xx.xx Docking Ring Standard Type Currently powered on Stored in a warehouse.
  • ACCRETECH / TSK: UF 200

    ACCRETECH / TSK UF 200 Prober OCR installed.
  • ACCRETECH / TSK: UF 200

    ACCRETECH / TSK UF 200 Prober OCR installed.
  • ACCRETECH / TSK: UF 3000EX

    ACCRETECH / TSK UF 3000EX Prober OCR Type Clean pad function Hinge TSK MHF4000EX SCU-500R Chiller 2008 vintage.
  • ACCRETECH / TSK: UF 3000EX

    ACCRETECH / TSK UF 3000EX Prober OCR Type Clean pad function Hinge TSK MHF4000EX SCU-500R Chiller 2008 vintage.
  • ACCRETECH / TSK: UF 3000

    ACCRETECH / TSK UF 3000 Probers Unistat 340 Chiller 2005 vintage.
  • ACCRETECH / TSK: UF 3000

    ACCRETECH / TSK UF 3000 Probers Unistat 340 Chiller 2005 vintage.
  • ACCRETECH / TSK: UF 3000

    ACCRETECH / TSK UF 3000 Probers Unistat 340 Chiller 2005 vintage.
  • ACCRETECH / TSK: UF 3000

    ACCRETECH / TSK UF 3000 Hot / Cold Probers 12" nickel chuck, hot and cold Temperature range: -10ºC to 90ºC Unistat 340 chiller 2005 vintage.
  • ACCRETECH / TSK: UF 3000

    ACCRETECH / TSK UF 3000 Hot / Cold Probers 12" nickel chuck, hot and cold Temperature range: -10ºC to 90ºC Unistat 340 chiller 2005 vintage.
  • ACCRETECH / TSK: UF 200SA

    ACCRETECH / TSK UF 200SA Probers, 5", 6", 8" Specifications: Software: 3G.05.BA Overall Accuracy: Within 4 um Wafer size: 5", 6", 8" X/Y Axis: Probing area: ±120 mm Maximum speed: 200 mm/s Z axis: Full stroke: 37 mm Maximum speed: 25ms/0.2mm Stroke Rotation range: ±5° Fine alignment: CCD ITV Image Processing Loader: Cassette mounts: 1 (2nd cassette with option) Wafer handling: robot arm / backside holding Hard disk: 3.5" 4.5GB (1 unit standard) Floppy disk: 3.5" 2HD (1.4M) / 2DD (1 unit standard) Display: 10.4" TFT Color LCD Power consumption: Approximately 1.5 kVA Air supply: Source pressure: 0.45 Mpa or more Consumption: Approximately 0.1 liters / wafer Vacuum supply: Less than -53 kPa, 30 liter /minute Configuration Options: Loader type: standard Wafer ID reading option: Yes Needle inspection option: Yes Auto needle alignment option: Yes Auto needle height setting: Yes GP-IB option: Yes Cleaning unit option: Yes Chuck option: Nickel hot chuck 30~150 Multi pass probing option: Yes Automatic card change option: Yes Printer option: No Manipulator option: No OCR option: Yes Docking type: Wafer Burn-in Tester Focus 7000 or 2000 Board: 1,4,6,8,10,11,13,14,15,16,17,18 Can be inspected 2004 - 2005 vintage.
  • ACCRETECH / TSK: UF 200SA

    ACCRETECH / TSK UF 200SA Probers, 5", 6", 8" Specifications: Software: 3G.05.BA Overall Accuracy: Within 4 um Wafer size: 5", 6", 8" X/Y Axis: Probing area: ±120 mm Maximum speed: 200 mm/s Z axis: Full stroke: 37 mm Maximum speed: 25ms/0.2mm Stroke Rotation range: ±5° Fine alignment: CCD ITV Image Processing Loader: Cassette mounts: 1 (2nd cassette with option) Wafer handling: robot arm / backside holding Hard disk: 3.5" 4.5GB (1 unit standard) Floppy disk: 3.5" 2HD (1.4M) / 2DD (1 unit standard) Display: 10.4" TFT Color LCD Power consumption: Approximately 1.5 kVA Air supply: Source pressure: 0.45 Mpa or more Consumption: Approximately 0.1 liters / wafer Vacuum supply: Less than -53 kPa, 30 liter /minute Configuration Options: Loader type: standard Wafer ID reading option: Yes Needle inspection option: Yes Auto needle alignment option: Yes Auto needle height setting: Yes GP-IB option: Yes Cleaning unit option: Yes Chuck option: Nickel hot chuck 30~150 Multi pass probing option: Yes Automatic card change option: Yes Printer option: No Manipulator option: No OCR option: Yes Docking type: Wafer Burn-in Tester Focus 7000 or 2000 Board: 1,4,6,8,10,11,13,14,15,16,17,18 Can be inspected 2004 - 2005 vintage.
ショー 毎ページ
1 2 3 4 5 6